SUSS MicroTec launches ELD 300 Excimer Laser Debonder for 3D-Integration
(Nanowerk News) SÜSS MicroTec, a leading supplier of equipment and process solutions for the semiconductor and related markets, has launched an excimer laser debonder, the ELD300, for the stress free debonding of 200 and 300mm 3D-IC wafers, today.
The laser debonder can be used as a stand-alone, semi-automated system or as an integrated process module in SUSS MicroTec's XBC300 Gen2 platform. The debonding method used in the ELD300 relies on a 308nm Excimer laser to separate the glass carrier from a tape mounted thin wafer. The ultraviolet light of the pulsed laser beam is absorbed in the adhesive or in an optional UV absorption layer within a few hundred nanometers. The absorbed energy breaks the chemical bonds in the adhesive or absorption layer without generating thermal stress on the thin device wafer so that the glass carrier can easily be lifted off after the debonding process. With the alternative module for mechanical peel-off debonding and the modules for post-debond cleaning of tape mounted thin wafers or carrier wafers, SUSS MicroTec's XBC300 Gen2 platform offers a full solution package for debonding and cleaning applications.
The ELD300 mainly focuses on 2.5D and 3D-IC applications but also addresses the requirements in the areas of 3D MEMS, CMOS Image Sensors and power devices. The main competitive advantages of Excimer laser assisted debonding with the ELD300 are the short process times which result in high throughput, the debonding selectivity of the process, the absence of mechanical or thermal stress on the thin device wafer and eventually the high degree of automation which is of essence for high volume manufacturing.
"With the launch of the ELD300 SUSS MicroTec now offers two dedicated solutions for room temperature debonding: mechanical peel-off and Excimer laser assisted processes.", says Frank P. Averdung, President and CEO of SUSS MicroTec AG. "We see ourselves well positioned for the challenging tasks that can be expected from high volume production of 3D-ICs."
About SUSS MicroTec
SUSS MicroTec is a leading supplier of equipment and process solutions for microstructuring in the semiconductor industry and related markets. In close cooperation with research institutes and industry partners SUSS MicroTec contributes to the advancement of next-generation technologies such as 3D Integration and nanoimprint lithography as well as key processes for MEMS and LED manufacturing. With a global infrastructure for applications and service SUSS MicroTec supports more than 8.000 installed systems worldwide. SUSS MicroTec is headquartered in Garching near Munich, Germany. For more information, please visit http://www.suss.com
Source: SUSS MicroTec (press release)
If you liked this article, please give it a quick review on reddit or StumbleUpon. Thanks!
Check out these other trending stories on Nanowerk: