Posted: September 8, 2009

Electroluminescence from electrolyte-gated carbon nanotube field-effect transistors

(Nanowerk News) Field-effect transistors (FETs) based on single-walled carbon nanotubes (SWNTs) exhibit a range of optoelectronic effects including near-infrared electroluminescence. The effect results from the injection of holes and electrons from opposite electrodes into the nanotube, where they recombine and emit light.
Emission spots: A composite image of electroluminescence from an array of carbon nanotubes during a gate voltage scan
Emission spots: A composite image of electroluminescence from an array of carbon nanotubes during a gate voltage scan.
Advances in the understanding of the charge transport and the factors that affect electroluminescence efficiency in SWNTs are necessary to develop nanoscale light sources.
Researchers at Argonne's Center for Nanoscale Materials, working with scientists at the University of Illinois at Urbana-Champaign, have demonstrated electroluminescence by using highly aligned arrays of SWNTs ("Electroluminescence from Electrolyte-Gated Carbon Nanotube Field-Effect Transistors").
Using electrolytes instead of traditional oxide dielectrics facilitates injection and accumulation of high densities of holes and electrons at very low gate voltages. Numerous emission spots corresponding to individual nanotubes were observed. Additional tunability of the optoelectronic properties is achieved by introducing thin layers of HfO2 and TiO2 to the gate dielectric.
Source: Argonne National Laboratory