Open menu
Posted: Oct 26, 2011

ScanNano to Design MEMS Device Using Its Deep Vacuum Gap (DVG) Technology

(Nanowerk News) Dr. Andrei Pavlov, President and Founder of ScanNano Tek announced encouraging progress in a new R&D Program in which STMicroelectronics, for its CMOS technology expertise, is engaged.
This program is intended to design, prototype and evaluate, MEMS devices, using ScanNano's Deep Vacuum Gap (DVG) manufacturing technology. In this first-stage, the devices will be directed mainly towards Radio Frequency (RF) applications (e.g. RF switches, variable capacitors and integrated circuits) in the telecommunications market. The program will also evaluate the design and cost benefits expected from using DVG Technology at the commercial production stage.
Dr Pavlov today explained that, "Proving out our DVG technology is a critical step in our strategy to grow Scannano into a major designer of advanced NANO-MEMS devices for a wide range of new applications in many different markets." Deep Vacuum Gap technology is a unique method of producing highly accurate vacuum gaps within MEMS and NANO devices without the need for multiple fabrication and encapsulation steps. DVG permits the fabrication of structures having nano-gaps which can be as small as a few nanometers in size, or even less than 1 nm (e.g., 0.5 nm). There can be several nanogaps in one device and the device may have multi-gap or multi-nano-gap structures.
Present technology requires the use of a sacrificial layer and an etching process which limits the minimum size of the gap because it is more difficult to etch thinner sacrificial layer materials underneath the top structure. Accordingly, the sensitivity of the MEMS structure is lower for larger gaps and higher power is needed to control the devices. Furthermore, most traditional MEMS devices require a vacuum in the gap and therefore, require special protection from ambient atmosphere, such as sealing and encapsulation. Because ScanNano's DVG devices can be produced very accurately at the NANO scale, many more devices can be accommodated in the same space, offer lower power consumption and encapsulation is not necessary. Furthermore, the demanding requirements associated with current MEMS/NANO technologies limits the range of qualified manufacturing facilities. On the other hand, ScanNano's DVG technology permits its implementation in conventional CMOS manufacturing facilities. And because encapsulation is not required, material and manufacturing costs are significantly reduced.
About ScanNano Tek
ScanNano Tek is a private Finnish Research and Development company, specialising in MEMS technology at the nano scale. Its DVG technology has many applications in the fields of NEMS and MEMS and a variant has been developed for highly efficient solar cell photo-voltaic devices. Scannano works with customers' design engineers to apply its DVG technology to specific functional requirements and existing manufacturing facilities.
Source: ScanNano Tek (press release)
Subscribe to a free copy of one of our daily
Nanowerk Newsletter Email Digests
with a compilation of all of the day's news.
These articles might interest you as well: