Product Category
Single element nanoparticles

Element name
Titanium (Ti)

Purity (%)
not less 99,8%wt.

APS
80-110 nm

Phase
Powder

Specification
Appearance and color: dark gray to black suspension or paste. Average particle size is 80-110 nanometers. The particles are spherical and form agglomerates. Bulk density of dry powder is 2.85 g/cm3. BET surface area - 13.8 m2/g.  The self-ignition temperature of the suspension vapor in air is 338 °C. Boiling point is 69 °C. Flash temperature -22 °C. Hexane is not soluble in water. On removing hexane from the suspension (evacuation), titanium powder may spontaneously ignite in air.
DANGER

Description
This nanopowder was prepared by electric explosion of a metallic wire in argon, then it was wetted by hexane and packaged in glass bottles under inert atmosphere.
CHEMICAL COMPOSITION
Material consists of 40-60% of hexane, balance - titanium powder not less 99,8%wt.
PHYSICAL AND CHEMICAL PROPERTIES
Appearance and color: dark gray to black suspension or paste. Average particle size is 80-110 nanometers. The particles are spherical and form agglomerates. Bulk density of dry powder is 2.85 g/cm3. BET surface area - 13.8 m2/g.  The self-ignition temperature of the suspension vapor in air is 338 °C. Boiling point is 69 °C. Flash temperature -22 °C. Hexane is not soluble in water. On removing hexane from the suspension (evacuation), titanium powder may spontaneously ignite in air.
DANGER
The danger is determined by corresponding characteristics of the organic solvent used - hexane. Readily flammable liquid (Сlass 1B and 1C), gives open fire when burning. According to ANSI/NFPA 325 , the identification number of fire risk is 3.