Untangling a strange phenomenon that both helps and hurts lithium-ion battery performance

(Nanowerk News) The lithium ion batteries that power electric vehicles and phones charge and discharge by ferrying lithium ions back and forth between two electrodes, an anode and a cathode. The more lithium ions the electrodes are able to absorb and release, the more energy the battery can store.
One issue plaguing today’s commercial battery materials is that they are only able to release about half of the lithium ions they contain. A promising solution is to cram cathodes with extra lithium ions, allowing them to store more energy in the same amount of space. But for some reason, every new charge and discharge cycle slowly strips these lithium-rich cathodes of their voltage and capacity.
A new study provides a comprehensive model of this process, identifying what gives rise to it and how it ultimately leads to the battery’s downfall. Led by researchers from Stanford University and the Department of Energy’s SLAC National Accelerator Laboratory and Lawrence Berkeley National Laboratory, it was published in Nature Materials ("Metal–oxygen decoordination stabilizes anion redox in Li-rich oxides").
Lithium-Ion Battery Performance
A mysterious process called oxygen oxidation strips electrons from oxygen atoms in lithium-rich battery cathodes and degrades their performance, shown at left. Better understanding this property and controlling its effects could lead to better performing electric vehicles. (Image: Gregory Stewart/SLAC National Accelerator Laboratory)
“This research addressed a lot of misconceptions in the field,” says study lead William Gent, a Stanford University Siebel Scholar and winner of an Advanced Light Source and Molecular Foundry Doctoral Fellowship at Berkeley Lab. “There's a long way to go, but now we have a foundational understanding of the properties that lead to this process that's going to help us harness its power rather than just stab at it in the dark.”

Soaking it up

The cycling of lithium through a battery is like a sponge relay, a staple of picnics and Fourth of July barbecues that challenges participants to transfer water from one bucket to another using only a sponge. The more absorbent the sponge, the more water can be squeezed into the second bucket.
Lithium-rich battery cathodes are like super-absorbent sponges, able to soak up nearly twice as many lithium ions as commercial cathodes, packing as much as twice the energy into the same amount of space. This could allow for smaller phone batteries and electric vehicles that travel farther between charges.
Most lithium ion battery cathodes contain alternating layers of lithium and transition metal oxides – elements like nickel or cobalt combined with oxygen. In commercial batteries, every time a lithium atom leaves the cathode for the anode, an electron is snagged from a transition metal atom on its way out. These electrons create the electrical current and voltage necessary to charge the material.
But something different happens in lithium-rich batteries.
“An unusual feature of lithium-rich cathodes is that the electron comes from the oxygen rather than the transition metal,” says Michael Toney, a distinguished staff scientist at SLAC and a co-author of the paper. “This process, called oxygen oxidation, enables cathodes to extract about 90 percent of the lithium at a high enough voltage that it boosts the energy stored in the battery.”

Falling apart

But imagine in the sponge relay that with every subsequent soak, the structure of the sponge changes: the fibers stiffen and bundle together, eating up the empty space that makes the material so efficient at absorbing water. Oxygen oxidation does something similar. The authors’ previous study, published in Nature Communications, showed that every time lithium ions cycle out of the cathode into the anode, some transition metal atoms sneak in to take their place and the atomic structure of the cathode becomes a little messier. The layered structure essential to the cathode’s performance slowly falls apart, sapping its voltage and capacity.
In this new study, the researchers showed that this is because yanking the electron from oxygen makes it want to form another bond and transition metal atoms have to move around to accommodate that bond, changing the atomic structure.
“This is the first paper that provides a complete model as to why these things are related and where a lot of the lithium-rich cathode’s unusual properties come from,” says Jihyun Hong, a Stanford and SLAC postdoc, now at the Korea Institute of Science and Technology (KIST).

Harnessing the effect

Toney says it took the combination of theory and many experimental methods, done at SLAC’s Stanford Synchrotron Light Source (SSRL) as well as Berkeley Lab’s Advanced Light Source (ALS) and Molecular Foundry, to disentangle this complicated problem.
The combination of experimental and computational techniques allowed the team to conclusively demonstrate the strong driving force behind changes in the cathode’s bonding configuration during oxygen oxidation. The next step, Toney says, is to find ways to produce those changes without totally disrupting the cathode’s crystal structure.
“Because oxygen oxidation gives rise to extra energy density, being able to understand and control it is potentially a game changer in electric vehicles,” says William Chueh, Assistant Professor of Materials Sciences at Stanford, who co-led the study. “So far, progress in this space has been largely incremental, with improvements of only a few percent per year. If we can find a way to make this work, it would be a huge step forward in making this technology practical.”
Source: By Ali Sundermier, SLAC National Accelerator Laboratory
Subscribe to a free copy of one of our daily
Nanowerk Newsletter Email Digests
with a compilation of all of the day's news.
 
These articles might interest you as well: