Posted: Oct 27, 2010

EU research initiative aims to increase electronic device efficiency by 10x and eliminate power consumption of devices in standby mode

(Nanowerk News) Today, Ecole Polytechnique Federale de Lausanne and IBM announced a major research initiative, with several leading academic and corporate research organizations across Europe, to address the alarming growth of energy consumption by electronic devices, ranging from mobile phones to laptops to televisions to supercomputers. The research project, called Steeper, aims to increase the energy efficiency of these devices, when active, by 10 times and virtually eliminate power consumption when they are in passive or standby mode.
Coordinated by Ecole Polytechnique Federale de Lausanne (EPFL), Project Steeper includes leading corporate research organizations IBM Research - Zurich, Infineon and GLOBALFOUNDRIES*, large research institutes CEA-LETI and Forschungszentrum Julich, academic partners, University of Bologna, University of Dortmund, University of Udine and the University of Pisa and the managerial support of SCIPROM.
energy vampires
Consortium tackles energy vampires with science, not garlic just in time for Halloween. The research project, called Steeper, aims to increase the energy efficiency of these devices, when active, by 10 times and virtually eliminate power consumption when they are in passive or standby mode also known as vampire power. Vampire Energy cost US consumers $3 billion per year (Dept of Energy, 2005.
Scientists collaborating on the project will apply their expertise and research to tunnel field effect transistors (TFETs) and semiconducting nanowires to improve the efficient use of energy in electronics. To explain the challenge, consider a leaky water faucet -- even after closing the valve as far as possible water continues to drip -- this is similar to today's transistor, in that energy is constantly "leaking" or being lost or wasted in the off-state. In Steeper, scientists not only hope to contain the leak by using a new method to close the valve or gate of the transistor more tightly, but also open and close the gate for maximum current flow with less turns, i.e. less voltage for maximum efficiency.
According to the International Energy Agency (IEA), electronic devices currently account for 15 percent of household electricity consumption, and energy consumed by information and communications technologies as well as consumer electronics will double by 2022 and triple by 2030 to 1,700 Terawatt hours -- this is equal to entire total residential electricity consumption of the United States and Japan in 2009(1).
Particularly wasteful is the enormous amount of standby consumption. In the European Union it is estimated that standby power already accounts for about 10 percent of the electricity use in homes and offices of the member States(2). By 2020 it is expected that electricity consumption in standby/off-mode will rise to 49 terrawatt hours per year - nearly equivalent to the annual electricity consumption for Austria, Czech Republic and Portugal combined(3).
"Our vision is to share this research to enable manufacturers to build the Holy Grail in electronics, a computer that utilizes negligible energy when it's in sleep mode, which we call the zero-watt PC," said Prof. Adrian M. Ionescu, Nanolab, Ecole Polytechnique Federale de Lausanne, who is coordinating the project. With the support of the European Commission's 7th Framework Program (FP7), project Steeper scientists will explore novel nanoscale building blocks for computer chips that aim to reduce the operating voltage to less than 0.5 Volt, thus reducing their power consumption by one order of magnitude.
"Power dissipation has become one of the major challenges for today's electronics, particularly as the number of devices used by businesses and consumers multiplies globally," said Dr. Heike Riel, who leads the nanoscale electronics group at IBM Research - Zurich. "By applying our collective research in TFETs with semiconducting nanowires we aim to significantly reduce the power consumption of the basic building blocks of integrated circuits affecting the smallest consumer electronics to massive, supercomputers."
The Supporting Science
The development of novel devices, such as the steep slope transistors, from which the project gets its name, can provide a much more abrupt transition between the off and on states when compared with the current 60mV/decade limit of metal?oxide?semiconductor field-effect transistor (MOSFET) at room temperature.
This simultaneously allows for reducing the sub-threshold leakage and lowering the voltage operation. The development of energy-efficient steep sub-threshold slope transistors that can operate at sub-0.5V operation domain will be a critical factor in the success of the project.
To achieve this, scientists will study the development of so-called TFETs based on silicon (Si), silicon-germanium (SiGe) and III-V semiconducting nanowires. Nanowires are cylindrical structures measuring only a few nanometers (nm) in diameter, which allow optimum electrostatic control of the transistor channel. In a TFET, quantum mechanical band-to-band tunneling is exploited to switch on the device and thus achieve a steeper turn-on characteristics compared to conventional MOSFETs.
Project Steeper will evaluate the physical and practical limits of boosting the performance of TFETs with III-V nanowires, and the resulting advantages for future energy efficient digital circuits.
The project started in June 2010 and will continue for 36 months.
Sources:
(1) Gadgets and Gigawatts, International Energy Agency (IEA), Policies for Energy Efficient Electronics, 424 pages, ISBN 978-92-64-05953-5
(2) European Commission Joint Research Center, Institute for Energy, European Codes of Conduct for ICT
(3) Electricity Consumption and Efficiency Trends in European Union, Status Report 2009, JRC-IE
* Participation in Steeper is still pending for GLOBALFOUNDRIES
Source: Ecole Polytechnique Federale de Lausanne & IBM