Hydrocracking our way to recycling plastic waste

(Nanowerk News) Millions of tons of plastic end up in landfills every year. It’s a big societal problem and an even larger environmental threat.
In the United States, less than 9% of plastic waste is recycled. Instead, more than 75% of plastics waste ends up in landfills and up to 16% is burned, a process that releases toxic gases into the atmosphere.
Researchers from the University of Delaware’s Center for Plastics Innovation (CPI) have developed a direct method to convert single-use plastic waste — plastic bags, yogurt containers, plastic bottles and bottle caps, packaging and more — to ready-to-use molecules for jet fuels, diesel and lubricants.
The work, reported in a paper in Science Advances ("Plastic waste to fuels by hydrocracking at mild conditions"), focuses on using a novel catalyst and unique process to quickly break down these hardest-to-recycle plastics, known as polyolefins. Polyolefins account for 60 to 70% of all plastics made today.
The UD-developed process requires approximately 50% less energy than other technologies, and it doesn’t involve adding carbon dioxide to the atmosphere, an emissions savings over other commonly used techniques. It can be done in just a couple hours at low temperature, around 250 degrees Celsius. This is slightly higher than the 450-degree Fahrenheit oven temperature you might use to roast vegetables or bake a puff pastry at home.
Importantly, the UD team’s method can treat a variety of plastics, even when they are mixed together, a plus considering the way recyclables are managed.
“Chemical conversion is the most versatile and robust approach to combat plastics waste,” said Dion Vlachos, the project principal investigator and the Unidel Dan Rich Chair in Energy Professor of Chemical and Biomolecular Engineering at UD.
Co-authors on the paper include Sibao Liu, a former UD postdoctoral researcher, now an associate professor of chemical engineering and technology at Tianjin University; and CPI researchers Pavel Kots, a UD postdoctoral fellow; Brandon Vance, a UD graduate student; and Andrew Danielson, a senior majoring in chemical engineering.

Creating ready-to-use molecules

The UD research team used a chemical process called hydrocracking to break down the plastic solids into smaller carbon molecules, then added hydrogen molecules on either end to stabilize the material for use.
Catalytic cracking is not new. Refineries have used it to convert heavy crude oil into gasoline for years.
The research team’s method, however, does more than just break the plastic down. It also converts the material into branched molecules that allow them to be more directly translated into an end product.
“This makes them ready-to-use molecules for high-value lubricant or fuel applications,” said Vlachos, who also directs the Delaware Energy Institute and the Catalysis Center for Energy Innovation at UD.
The catalyst itself is actually a hybrid material, a combination of zeolites and mixed metal oxides.
Zeolites are known to have properties that make them good at creating branched molecules. Zeolites are found in things like water purification or softener systems and home detergents, where they counteract minerals like calcium and magnesium, making hard water softer and improving the laundry process.
Mixed metal oxides, meanwhile, are known for their ability to break down large molecules just the right amount without overdoing it. The antacid in your medicine cabinet, for example, is a metal oxide used to break down, or neutralize, the acid causing your upset stomach.
“Alone these two catalysts do poorly. Together, the combination does magic, melting the plastics down and leaving no plastic behind,” Vlachos said.
This gives the CPI-developed method an advantage over current techniques used today, although Vlachos stressed that more work is needed to translate these scientific methods to industry. Another plus: the team’s catalyst materials are commonly used and, therefore, fairly inexpensive and abundant.
“These are not exotic materials, so we can quickly start thinking about how to use the technology,” he said. He and Liu have filed a provisional patent on the novel bi-catalyst and unique method through UD’s Office of Economic Innovation and Partnerships.

Sustainable solutions, circular economy

Reducing plastic waste by chemically converting it to fuels can play a powerful role in driving a circular economy, where materials are recycled into something new at the end of their useful lifespan, instead of being thrown away. The recycled components can be used to make the same thing again or, in the case of fuels, upcycled into higher-value products — creating both economic and environmental gains.
“This innovative catalytic approach is a significant advance in our quest for depolymerization processes that involve less energy intensive pathways and generate highly specific breakdown targets, said CPI Director LaShanda Korley, Distinguished Professor of Materials Science and Engineering and Chemical and Biomolecular Engineering. “This fundamental understanding opens up a new route toward plastics waste valorization.”
For Andrew Danielson, a UD senior chemical engineering major involved in the project, the potential environmental benefits of plastic conversion are exciting.
“Plastic waste is a serious environmental issue. I believe that this research can help lead to better methods of plastic repurposing,” said Danielson, whose contributions to the work included verifying the data collected during the project by reproducing the experiments.
Following graduation in May, Danielson will put this research experience to work in the chemical industry. He’s already landed a job in process controls, a part of the manufacturing process that involves controlling variables, such as temperature, pressure and conductivity, among other things.
Next steps in the CPI research include exploring what other plastics the team’s method can treat and what products it can make. To begin, Vlachos said the team hopes to expand collaborations with colleagues across campus and in the Center for Plastics Innovation to explore other avenues for making valuable products by eliminating waste.
“As this circular economy gets going, the world will need to make fewer original plastics because we will be reusing materials made today into the future,” he said.
Another goal is to develop methods to improve the recycling process itself.
“We want to use green electricity to drive the chemical processing involved in making new things. We are very far away at the moment from seeing this, but that’s where we are headed over the next 10 to 20 years,” Vlachos said.
Source: University of Delaware