Buckle up! A new class of materials is here

(Nanowerk News) Usually, the two characterizations of a material are mutually exclusive: something is either stiff, or it can absorb vibrations well – but rarely both. However, if we could make materials that are both stiff and good at absorbing vibrations, there would be a whole host of potential applications, from design at the nano-scale to aerospace engineering.

Buckling does the trick

A team of researchers from the University of Amsterdam has now found a way to create materials that are stiff, but still good at absorbing vibrations – and equally importantly, that can be kept very light-weight.
David Dykstra, lead author of the publication (Advanced Materials, "Buckling Metamaterials for Extreme Vibration Damping"), explains: “We discovered that the trick was to use materials that buckle, like thin metal sheets. When put together in a clever way, constructions made out of such buckled sheets become great absorbers of vibrations – but at the same time, they preserve a lot of the stiffness of the material they are made out of. Moreover, the sheets do not need to be very thick, and so the material can be kept relatively light.”
The image shows an example of a material that uses this buckling of metal sheets to combine all of these desired properties:
A buckled material that is both stiff and good at absorbing vibrations. (Image: D. Dykstra et al.)

A host of applications

The researchers thoroughly investigated the properties of these buckled materials, and found that they all showed this magical combination of stiffness and ability to dissipate vibrations. As known materials do not have this desired combination of properties, the new lab-made materials (or metamaterials) have a very wide range of potential applications, and at a very wide range of scales.
Possible uses range from meter-sized (think of aerospace, automotive applications and many other civil designs) to the microscale (applications such as microscopes or nanolithography).
Dykstra: “Humans like to build things – small things and big things – and we almost always want these structures to be light. If that can be done with materials that are both stiff and good at shock-absorbing, many existing designs can be improved and many new designs become possible. There really is no end to the possible applications!”
Source: Universiteit van Amsterdam (Note: Content may be edited for style and length)
We curated lists with the (what we think) best science and technology podcasts - check them out!