How does flow effect forces of charged surfaces/particles and surfactants in liquids?

Mar 11, 2020
How does flow effect forces of charged surfaces/particles and surfactants in liquids? (Nanowerk News) You're at the office. You've typed up a report and press print. Walk over to the printer and retrieve the fresh, inkjet-printed paper. As you admire your work, were you aware that scientists consider the charge of the particles in the liquid ink for improved print quality? Were you aware that understanding charges of particles allows for engineers to make the paints aggregate (gather together) or disperse according to such particle interactions?
A surfactant is something that is added to a liquid (in this study), to make it act with other surfaces. People use surfactants daily at home with soaps, detergents and shampoos to aid in lifting grime off of surfaces. Surfactants also have important industrial uses such as in the lining of pipelines to reduce drag.
As one can imagine, understanding how the effect of charges of particles in liquid can have significant impact on how well surfactants work and systems run efficiently. Until now, there was an absence of exploration into how the flow of liquids effect the charges of the particles in the liquid, surfaces and surfactants.
To investigate flow, Cathy McNamee and Hayato Kawakami of Shinshu University built an apparatus where they combined an Atomic Force Microscope, peristaltic pump and camera to visually capture the liquid in the process of flow (Langmuir, "Effect of the Surfactant Charge and Concentration on the Change in the Forces between Two Charged Surfaces in Surfactant Solutions by a Liquid Flow").
They used silica particles and silicon wafers, both with negatively charged surfaces in the presence of ionic surfactants. An ionic surfactant has a "head" that attracts water and a "tail" that repels water. A negative and positive surfactant of the same chain length was used to determine the effect of the charge on the forces, sodium dodecyl sulfate (anionic surfactant) and dodecyl trimethylammonium bromide (cationic surfactant).

Liquid flow allows for more adsorption. (© ACS)
McNamee and Kawakami were able to determine that:
The adsorption of the surfactants to the particles can change when the liquid flow changes the forces between charged particles. When the charge of the surfactant was the same as the surface, liquid flow did not increase the adsorption of the surfactants to the particle surfaces, but increased the number of ions near the surfaces. The inter-particle repulsive forces slightly decreased. When the charge of the surfactant was opposite to the particles, a low concentration of surfactant flow increased the adsorption of the surfactants to the particle surfaces. This changed the inter-particle forces and could change attractions to repulsions if the appropriate surfactant concentration was used. With high surfactant concentrations where the charge of the surfaces change in the absence of flow, flow tended to increase the stiffness of the film of the adsorbed surfactants. It might be possible to control the aggregating ability of charged particles with the flow rate if the appropriate surfactant type and concentration is used.
Professor McNamee found that the flow rate can possibly be used to control the aggregation and dispersion of charged particles, allowing for less surfactant use. During real world uses such as water treatment, it is possible to remove impurities and harmful substances by using charges to gather or repel certain substances. Even our bodies cleverly use surfactants, too. Bile salts, (a surfactant!) aids in digestion. The potential applications of this research range from medicine, such as flow cytometer to all aspects of industry.

Source: Shinshu University

Subscribe to a free copy of one of our daily Nanowerk Newsletter Email Digests with a compilation of all of the day's news.