How does Gecko tape work?

(Nanowerk News) To solve practical issues, sometimes all we have to do is study nature. An often quoted example is that of the gecko, a small animal known for the phenomenal adhesive strength in its feet, which allows it to walk on walls and even ceilings. The phenomenon led to ‘gecko tape’, a strongly adhesive DIY-tape. Its name suggests that the tape and the gecko stick in similar ways, but is the underlying physics indeed the same?
For the gecko its stickiness, or adhesion, is caused by small pillars in its feet. The electric forces between the molecuses in those feet and the surface on which the gecko walks – the so-called Van der Waals forces – allow the gecko to stick to almost any surface.
Over the past twenty years, a lot of research was carried out to create synthetic versions of this system – and seemingly wit succes: one can now buy ‘gecko tape’, a dubble sided tape of which the name at least suggests that it uses the same principles as gecko feet.

Gecko tape: a closer look

But is that really the case? UvA researchers Hans Terwisscha-Dekker, Marion Grzelka, Simon Lépinay and Daniel Bonn decided to investigate how ‘gecko-like’ gecko tape really is (Biotribology, "How does ‘Gecko tape’ work?").
A gecko foot and a roll of gecko tape
A gecko foot and a roll of gecko tape. Two pictures of the same physics? (Image: Bjørn Christian Tørrissen)
To begin with, they studied the surface of the tape using a microscope, and indeed saw small pillars, similar to those in the gecko’s feet. Next, they measured the adhesion energy between gecko tape and glass.
It became clear that gecko tape indeed is stickier than normal double sided tape on glass. But is the gecko tape physics also the same as that of the gecko feet? After the researchers had removed the pillars of the gecko tape’s surface, there was a surprise: the tape still showed the same amount of adhesion. It seemed something was happening that had little to do with the gecko.
To find out what was going on, the researchers studied the contact surface between the tape and the glass during the experiment – that is: the amount of microscopic surface where the two materials truly touch. It turned out that, with and without the pillars, there was a much bigger contact surface between the gecko tape and the glass than in the case of ordinary double sided tape. Per unit of area of ‘true contact’, both kinds of tape were more or less equally sticky.

Softer tape

The conclusion: the pillars on the gecko tape do not play a role in its adhesive strength. This in stark contrast with the gecko itself, which makes essential use of the surface structure of the pillars. Despite its similarities with the real gecko, gecko tape therefore works in the same way as ordinary tape: the adhesion is caused by glue, not by Van der Waals forces.
Then why does gecko tape work so much better? It turns out that it is the tape’s softness that makes its contact surface bigger than that of normal tape, causing it to be stickier. That in turn does correspond to what the gecko does: using the pillar structure, the animal also maximizes the contact surface – even though it uses very different physics to achieve this.
Source: Universiteit van Amsterdam
Share this:
.
 
These articles might interest you as well: